Mercury MerCruiser MCM 454 Mag MPI Service Manual page 688

SERVICE MANUAL NUMBER 23
Discrete Input Circuit Check - Non-Scan 454 / 502 Mag MPI and 8.2L MPI Only
(4 of 5)
TESTING CIRCUITS FOR SHORT-TO-GROUND (–)
Index
90-861326--1 MARCH 1999
Downloaded from https://needmanual.com/
STEP
1. Disconnect BLU/TAN wire from oil pres-
sure switch.
2. Disconnect BLU/TAN wire from gear lube
1 monitor.
3. Disconnect BLU/TAN wire from transmis-
sion temperature switch (if equipped).
4. Key "ON", engine "OFF".
Does audio warning buzzer sound?
1. Key "OFF".
2. Disconnect ECM J1 connector.
2
3. Check for continuity between all wires
disconnected in "Step 1" and engine ground (–).
Is there continuity on BLU/TAN wire from
oil pressure switch?
Is there continuity on BLU/TAN wire from
gear lube switch?
Is there continuity on BLU/TAN wire from
transmission switch?
3 Circuit(s) is not shorted to ground (–).
4 Repair short-to-ground (–) in affected circuit.
ACTION
GENERAL SYSTEM DIAGNOSTICS
VALUE YES NO
PROCEED TO
Step 2 Step 3
Step 4 Step 3
Step 4 Step 3
Step 4 Step 3
–
–
Page 5E-95
–
–