Mercury MerCruiser MCM 454 Mag MPI Service Manual page 513

MULTI-PORT FUEL INJECTION DISASSEMBLY AND REASSEMBLY
2. Apply Loctite 242 to threads of studs. Using a stud driver, torque studs to 165 lb-in.
(18.6 Nm).
NOTE: If Boat is equipped with Quicksilver Zero Effort Controls, the throttle cable mounting
stud must be in the most forward position on throttle lever.
3. Connect throttle linkage. Secure cable barrel anchor stud with locknut and tighten
securely. Secure cable end guide to lever stud. Install locknut on stud until it contacts
end guide.
Index
Page 5C-12
Downloaded from https://needmanual.com/
a - Throttle Body
b - Throttle Body Mounting Studs
a - Position For Zero Effort Controls
a
a - Cable Barrel Anchor Stud
b - Locknut
SERVICE MANUAL NUMBER 23
a
b
a
b
90-861326--1 MARCH 1999
72792
73855
72791