Removal - Mercury MerCruiser MCM 454 Mag MPI Service Manual

WALTER V-DRIVE TRANSMISSION
Filling Transmission
1. Remove dipstick from top cover. Fill transmission with fluid, through dipstick hole, to
bring up to full mark.
IMPORTANT: To accurately check fluid level, run engine for 2 minutes immediately
prior to checking level.

Removal

1. Refer to the "Draining Procedures" in the maintenance section to drain the cooling sys-
tem.
2. Disconnect the propshaft coupler from the output shaft flange of the transmission.
3. Drain transmission fluid.
4. Remove the water cooling hoses from the transmission.
Index
Page 8E-4
Downloaded from https://needmanual.com/
a - Dipstick
a
a - Nuts (4)
b - Propshaft Coupler
a
b
SERVICE MANUAL NUMBER 23
75192
75646
90-861326--1 MARCH 1999