RISERS
Description
The exhaust riser is designed to increase the height of the exhaust elbow. This allows boats
with a low mounted engine package to meet the minimum exhaust system height require-
ments.
Torque Specifications
Exhaust Elbow
Exhaust Riser
Sealants
Quicksilver Perfect Seal
Preparation
Avoid possible injury or damage to equipment should wires be accidentally
shorted. Disconnect BOTH battery cables from battery before proceeding.
1. Disconnect battery cables from battery.
Avoid severe engine damage. Exhaust elbows and manifolds MUST BE drained to
prevent water (or coolant) from entering combustion chambers when exhaust el-
bows are removed.
2. Drain exhaust elbows and exhaust manifolds. Refer to SECTION 1B.
Index
Page 7C-2
Downloaded from
https://needmanual.com/
Fastener Location
Description
Part Number
92-34227--1
WARNING
CAUTION
SERVICE MANUAL NUMBER 23
Lb. Ft.
N·m
25
25
34
34
90-861326--1 MARCH 1999