Installation - Mercury MerCruiser MCM 454 Mag MPI Service Manual

WALTER V-DRIVE TRANSMISSION

Installation

1. Slide the over the studs in the adapter housing. The flange may have to be rotated to
align the splines on the adapter flange on the Walter V-Drive transmission and the out-
drive flange on the in-line transmission.
2. Install the nuts and torque to 50 lb. ft. (68 N·m).
3. Connect the wires to the oil pressure switch.
4. Fill the transmission with the recommended fluid.
Index
Page 8E-6
Downloaded from https://needmanual.com/
a - Nuts
b
a
a - Oil Pressure Switch
b - Water Hoses
SERVICE MANUAL NUMBER 23
a
b
90-861326--1 MARCH 1999
75191
75647