Mercury MerCruiser MCM 454 Mag MPI Service Manual page 152

MCM MODELS - BRAVO AND BLACKHAWK DRIVES WITH DRIVESHAFT EXTENSION
4. Install cable end guide on throttle lever, then push cable barrel end lightly toward throttle
lever end. (This will place a slight preload on shift cable to avoid slack in cable when
moving remote control lever.) Adjust barrel on throttle cable to align with hole in anchor
plate. Ensure hole in barrel positions cable as shown.
5. Secure throttle cable with hardware as shown and tighten securely.
6. Place remote control throttle lever in the wide open throttle (W.O.T.) position. Ensure
that throttle plate is completely open.
Index
Page 2B-20
Downloaded from https://needmanual.com/
a - Cable Barrel
b - Anchor Plate
a
a - Washer and Locknut
a - Throttle Plate
SERVICE MANUAL NUMBER 23
a
b
90-861326--1 MARCH 1999
75455
a
75454
a
75453