Exhaust Tube Installation - Mercury MerCruiser MCM 454 Mag MPI Service Manual

COLLECTORS

Exhaust Tube Installation

1. If required, remove and discard clamps and bellows from gimbal housing.
2. If required, install exhaust tube on gimbal housing as follows:
3. Remove and discard clamps and exhaust bellows.
Exhaust tube clamp may corrode if grounding clip is not installed.
a. Install grounding clip on tube.
NOTE: Bellows adhesive is not used when installing an exhaust tube.
Index
Page 7D-8
Downloaded from https://needmanual.com/
b
a
CAUTION
SERVICE MANUAL NUMBER 23
22116
90-861326--1 MARCH 1999