Fuel Supply Connections - Mercury MerCruiser MCM 454 Mag MPI Service Manual

Table of Contents

Advertisement

SERVICE MANUAL NUMBER 23

Fuel Supply Connections

Be careful when working on fuel system. Gasoline is extremely flammable and
highly explosive under certain conditions. Do not smoke or allow spark or open
flame in area. Wipe up any spilled fuel immediately.
Avoid gasoline fire or explosion. Improper installation of brass fittings or plugs into
fuel pump or fuel filter base can crack casting and/or cause a fuel leak.
1. Connect fuel line from fuel tank(s) to engine. Ensure connections are secure. Check for
Index
Index
90-861326--1 MARCH 1999
Downloaded from
https://needmanual.com/
Apply #592 Loctite Pipe Sealant with Teflon to threads of brass fitting or plug.
DO NOT USE TEFLON TAPE.
Thread brass fitting or plug into fuel pump or fuel filter base until finger tight.
Tighten fitting or plug an additional 1-3/4 to 2-1/4 turns using a wrench. DO NOT
OVERTIGHTEN.
Install fuel line. To prevent overtightening, hold brass fitting with suitable
wrench and tighten fuel line connectors securely.
Check for fuel leaks.
leaks.
a -
Fuel Inlet Hose Connects Here
b -
Fuel Filter Cover
MCM MODELS - BRAVO AND BLACKHAWK DRIVES
WARNING
WARNING
b
a
75036
Page 2A-13

Advertisement

Table of Contents
loading

Table of Contents