Mercury MerCruiser MCM 454 Mag MPI Service Manual page 128

MCM MODELS - BRAVO AND BLACKHAWK DRIVES
7. Reinstall flame arrestor and tighten screws securely. Connect crankcase vent hose to
flame arrestor as shown.
7.4L MPI MODELS
1. Place remote control handle(s) in neutral idle position.
2. Remove port side engine cover.
IMPORTANT: Be sure that cable is routed to avoid sharp bends and/or contact with
moving parts. DO NOT fasten any items to throttle cable. Outer cable must be free to
move when cable is actuated.
3. Remove flame arrestor.
Index Index
Page 2A-16
Downloaded from https://needmanual.com/
a
a - Crankcase Vent Hose
b
a - Flame Arrestor
b - Clamp
SERVICE MANUAL NUMBER 23
a
90-861326--1 MARCH 1999
75115
75447