Control And Status Words For Encoder - Siemens SINAMICS S120 Function Manual

10.1.2.5

Control and status words for encoder

The process data for the encoders is available in various telegrams. For example, telegram 3
is provided for speed control with 1 position encoder and transmits the process data of
encoder 1.
The following process data is available for the encoders:
● Gn_STW encoder n control (n = 1, 2, 3)
● Gn_ZSW encoder n status word
● Gn_XIST1 encoder n act. pos. value 1
● Gn_XIST2 encoder n act. pos. value 2
Example of encoder interface
Figure 10-7
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Note
Encoder 1: Motor encoder
Encoder 2: Direct measuring system
Encoder 3: Additional measuring system
Encoder 3 can be connected via p2079 and extension of the standard telegrams.
Example of encoder interface (encoder-1: two actual values, encoder -2: one actual
value)
10.1 Communication according to PROFIdrive
Communication
675