Siemens SINAMICS S120 Function Manual page 608

Safety Integrated basic functions
9.10 Acceptance test and certificate
D) Functional testing of actual value acquisition
1. General testing of actual value acquisition
2. Test of fail-safe actual value acquisition
E) Conclusion of the report
Report of the commissioning status tested and countersignatures
1. Extension of checksums (for each drive)
2. Countersignature
606
– After exchanging the component, initial activation and brief operation in both
directions.
WARNING
Risk through process
During this process, all personnel must keep out of the danger area.
– Only necessary if Extended Functions are used
– If the motion monitoring functions are activated (e.g. SLS or SSM with hysteresis),
briefly operate the drive in both directions.
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Drive functions