Siemens SINAMICS S120 Function Manual page 939

Calling the "Load to File System" dialog box
1. Call STARTER.
2. Open the required project.
3. Select the required drive unit in the project navigator of your STARTER project.
4. Call the "Load to file system" function.
Drive functions
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
The "Load to File System" dialog box opens.
Figure 12-32 Load to file system (default setting)
Basic information about the drive system
12.14 Write and know-how protection
937