Description - Siemens SINAMICS S120 Function Manual

Hide thumbs Also See for SINAMICS S120:

Table of Contents

Description

The motor changeover is used in the following cases, for example:

● Changing over between different motors and encoders

● Changing over different windings in a motor (e.g. star-delta changeover)

● Adapting the motor data

If several motors are operated alternately on a Motor Module, a matching number of drive

data sets must be created.

For the "VECTOR" control mode, the following applies:

To connect to a rotating motor, the "flying restart" function must be activated (p1200).

When changing over the drive data set between several motors that physically exist with

integrated holding brakes, it is not permissible that the internal brake control is used.

Drive functions

Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3

Applications

11.2 Description

Show Quick Links

Table of Contents