Siemens SINAMICS S120 Function Manual page 78

Extended setpoint channel
2.9 Ramp-function generator
Properties of the basic ramp-function generator
Figure 2-8
● Ramp-up time Tup p1120[0...n]
● Ramp-down time Tdn p1121[0...n]
● OFF 3 ramp-down:
● Set ramp-function generator:
● Freezing of the ramp-function generator using p1141 (not in jog mode r0046.31 = 1)
Properties of the extended ramp-function generator
Figure 2-9
● Ramp-up time Tup p1120[0...n]
● Ramp-down time Tdn p1121[0...n]
● Initial rounding IR p1130[0...n]
76
Ramp-up and ramp-down with the basic ramp-function generator
– OFF 3 ramp-down time p1135[0...n]
– Setting value ramp-function generator p1144[0...n]
– Signal, set ramp-function generator p1143[0...n]
Extended ramp-function generator
Function Manual, (FH1), 01/2013, 6SL3097-4AB00-0BP3
Drive functions