Restore The Translations; On Second S8710 Media Server; Install Communication Manager; Connect Duplication Cables - Avaya S8500 Manual

To access the Installation Wizard:
1
Activate the browser with the Home page.
2
.Click Launch Avaya Installation Wizard.
3
Follow the prompts, using Help on each page for more information.

Restore the translations

1
Connect the compact flash drive cord to one of the USB ports on the back of the media server.
2
Insert the compact flash disk with the translations into the bottom slot of the drive.
3
Under Data Backup/Restore, click View/Restore Data.
4
Select Local PC Card.
5
Click View.
6
Select the correct translation (xlr_) file (the most recent one is at the top) and both force options.
7
Click Restore.
8
Click Restore History and select desired file.
9
Click Status to view the Restore status. When the restoration is complete, the following message
displays:
Backup: 0: Restore of <filepath/filename> is completed successfully.

On second S8710 Media Server

NOTE:
This media server becomes media server 2.
CAUTION:
The duplication cables must not be connected. If connected, disconnect.

Install Communication Manager

1
Repeat tasks
AIW on page 128 for media server 2 and return here.

Connect duplication cables

1
Connect the fiber optic and CAT5 duplication cables to both media servers.

Move Ethernet cables

Moving the CAT5 cables from the S8500 Media Server to the S8710 Media Servers transfers control to
the S8710 Media Servers.
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8500 Media Server to S8710 Media Server
Power up the media server
On second S8710 Media Server
on page 125 through Configure the media server using
2
129