High Or Critical Reliability Configuration (Scc1) - Avaya S8500 Manual

Upgrading and administering the existing hardware

High or critical reliability configuration (SCC1)

1
Determine which PNs get the IPSI circuit packs. See
networks
2
Type
list cabinet
circuit packs and in which media gateway they are in.
3
Type status port-network number
to determine the active tone clock.
Enter
4
If needed, type
active.
5
Remove the ground plate, upper and lower rear covers from the media gateway(s). See
Removing ground plate and upper and lower rear covers,
64
NOTE:
You can replace the tone-clocks with the IPSI circuit packs and administer them ahead of
time. The circuit packs are hot-swappable, so you do not need to power down the PNs or
the carriers.
on page 57.
NOTE:
Not every port network requires an IPSI circuit pack.
and press
Enter
set tone cabinet carrier
Determining IPSI placement in port
to determine which port networks have TN2182 Tone Clock
where number is the number of the port network and press
and press to make the tone clock in the B carrier
Enter
on page 65.
Migrating to the Avaya S8700 or S8710 Media Server
Figure 7,
June 2004