Avaya S8500 Manual page 121

1
Power up the media server
2
Access the media server
3
Set up Telnet (if necessary)
4
Install Communication Manager
5
Access the media server
6
Check software version
7
Copy files to the media server (if any)
8
Configure the media server using AIW
9
Restore the translations
On second S8710 Media Server:
NOTE:
This media server becomes media server 2.
CAUTION:
The duplication cables must not be connected. If connected, disconnect.
1
Install Communication Manager
2
Connect duplication cables
Move the cables from the S8500 Media Server to the S8710 Media Servers:
1
Connect new cables to standby media server
CAUTION:
The following task causes an interruption of service; 2-5 minutes if moving only the
cables, up to 30 minutes if moving the Ethernet switch(es) and UPSs.
2
Move the cables
NOTE:
At this time, the active S8710 Media Server is controlling call processing.
On the standby S8710 Media Server:
1
Access the standby media server
2
Ping all the connections to the media server
3
Release the standby media server
4
Back up files on the media server
5
Release alarm suppression (optional)
6
Set the Product ID
7
Log off all administration applications
8
Disconnect from the media server
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Migrating from an S8500 Media Server to S8710 Media Server
Upgrade G350 or G700 Media Gateways and LSPs (if being used)
on page 125
on page 125
on page 125
on page 126
on page 127
on page 127
on page 128
on page 128
on page 129
on page 126
on page 129
on page 130
on page 130
on page 130
on page 131
on page 132
on page 132
on page 132
on page 132
on page 130
on page 130
2
121