Avaya S8500 Manual page 111

6
Type
ipsilogin
7
Log in as craft.
Prompt = [IPADMIN]:
Type show control interface and press Enter.
settings.
9
Type set control interface ipaddr netmask
provided IP address and
10
Press Enter to effect the changes.
11
Type
show control interface
The IP address, subnet mask, and default gateway information will be displayed.
Verify that the proper information was entered.
12
If required, type
provided IP address for their gateway.
13
Press Enter to effect the changes.
14
If required, use the
set port duplex
and diffserv parameters for the IPSI. Use Help to obtain syntax guidelines for these commands.
15
Type reset
Answer Y to the warning.
Migrating to the Avaya S8700 or S8710 Media Server
June 2004
and press Enter (abbreviated command = il).
NOTE:
The craft login used on the IPSI has a different password than the craft login used on the
media servers.
netmask
and press Enter.
set control gateway gateway
set vlan priority
(1 full), set port speed
and press Enter
NOTE:
Resetting the IPSI terminates the administration session. If further administration is
required, start a new telnet session to the IPSI.
8
Type
show port 1
and press Enter, where
is the customer provided subnet mask.
and press Enter, where
, ,
set vlan tag set vlan id
(1 100 MB), and set diffserv
Postmigration administration
and press Enter to see the current
ipaddr is the customer-
gateway is the customer-
, (1=disable),
set port negotiation
commands to enter VLAN
111