Connect To The Active Media Server - Avaya S8500 Manual

3 Migrating from an S8700 Media Server to an S8710 Media Server
On the S8700 Media Server
2
Type
3
Type
the laptop. This command responds with one of the following:
•
•

Connect to the active media server

1
Connect the laptop to the services port (2) on the back of the active media server using a
crossconnect CAT5 cable. See
S8700 Media Server,
Figure 23: Services laptop computer connected directly to the S8700 Media Server
1
Figure notes
1 Services laptop
2 Network Interface Card (NIC)
144
and press Enter to open a MS-DOS Command Line window.
command
and press Enter to clear the Address Resolution Protocol (ARP) cache in
arp -d 192.11.13.6
The command line prompt when the cache has been cleared.
The phrase:
The specified entry was not found.
This is returned when the specified IP address does not currently appear in the ARP cache.
Figure 23, Services laptop computer connected directly to the
on page 144.
2
2
1
3
4
2
1
3 NIC adapter cable (if necessary)
4 Black CAT5 crossconnect cable
Migrating to the Avaya S8700 or S8710 Media Server
5 5 4 4 3 3 2 2
cadlsrvr KLC 030402
June 2004