Avaya S8500 Manual page 142

3 Migrating from an S8700 Media Server to an S8710 Media Server
Pre-Migration Setup
On first S8710 Media Server:
1
Power up the media server
2
Access the media server
3
Set up Telnet (if necessary)
4
Install Communication Manager
5
Access the media server
6
Check software version
7
Verify date and time
8
Copy files to the media server (if any)
9
Configure the network parameters
10
Verify connectivity to the network server
11
Restore the security files
12
Restore the Linux migration backup files
13
Install software update (if any)
14
Verify software update installation
15
Verify media server configuration
On second S8710 Media Server:
1
Install Communication Manager and restore files
2
Connect duplication cables
3
Verify date and time
4
Install software update, if any
Move the cables from the S8700 Media Servers to the S8710 Media Servers:
142
NOTE:
This media server becomes media server 1.
CAUTION:
The duplication cables must not be connected. If connected, disconnect.
on page 150
on page 150
on page 150
on page 151
on page 152
on page 152
on page 153
on page 156
on page 157
on page 158
NOTE:
This media server becomes media server 2.
CAUTION:
The duplication cables must not be connected. If connected, disconnect.
on page 159
on page 159
on page 159
CAUTION:
The following task causes an interruption of service; 2-5 minutes if moving only the
cables, up to 30 minutes if moving the Ethernet switch(es) and UPSs.
on page 153
on page 154
on page 155
on page 156
on page 158
on page 159
Migrating to the Avaya S8700 or S8710 Media Server
June 2004