Set Confirm - 3Com Wireless LAN Switch WX1200 Command Reference Manual

52 C 3: S
HAPTER YSTEM

set confirm

S C
ERVICE OMMANDS
Examples — To create a banner that says Update meeting at 3 p.m.,
type the following command:
WX4400# set banner motd ^Update meeting at 3 p.m.^
success: change accepted.
See Also
clear banner motd on page 38
display banner motd on page 41
Enables or disables the display of confirmation messages for commands
that might have a large impact on the network.
Syntax —
set confirm {on | off}
on — Enables confirmation messages.
off — Disables confirmation messages.
Defaults — Configuration messages are enabled.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — This command remains in effect for the duration of the session,
until you enter a quit command, or until you enter another set confirm
command.
MSS displays a message requiring confirmation when you enter certain
commands that can have a potentially large impact on the network. For
example:
WX4400# clear vlan red
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]
Examples — To turn off these confirmation messages, type the
following command:
WX4400# set confirm off
success: Confirm state is off