Mobility; Commands By Usage - 3Com Wireless LAN Switch WX1200 Command Reference Manual

9
Commands by
Usage
M
OBILITY
Use Mobility Domain commands to configure and manage Mobility
Domain groups.
A Mobility Domain is a system of WX switches and MAP access points
working together to support a roaming user (client). One WX switch acts
as a seed switch, which maintains and distributes a list of IP addresses of
the domain members.
3Com recommends that you run the same MSS version on all the WX
switches in a Mobility Domain.
This chapter presents Mobility Domain commands alphabetically. Use
Table 45 to locate commands in this chapter based on their use.
Table 45 Mobility Domain Commands by Usage
Type
Mobility Domain
D
OMAIN
Command
set mobility-domain mode seed domain-name on
page 271
set mobility-domain member on page 269
set mobility-domain mode member seed-ip on page 270
display mobility-domain status on page 267
display mobility-domain config on page 267
clear mobility-domain member on page 266
clear mobility-domain on page 266
C
OMMANDS