Autoboot - 3Com Wireless LAN Switch WX1200 Command Reference Manual

620 C 24: B
HAPTER OOT

autoboot

P C
ROMPT OMMANDS
Table 111 Boot Prompt Commands by Usage (continued)
Type
Boot Profile Management display on page 628
Boot Profile
Management, cont.
Diagnostics
Displays or changes the state of the autoboot option. The autoboot
option controls whether a WX switch automatically boots a system image
after initializing the hardware, following a system reset or power cycle.
Syntax —
autoboot [ON | on | OFF | off]
ON — Enables the autoboot option.
on — Same effect as
OFF — Disables the autoboot option.
off — Same effect as
Defaults — The autoboot option is enabled by default.
Access — Boot prompt.
History —Introduced in MSS Version 3.0.
Examples — The following command displays the current setting of the
autoboot option:
boot> autoboot
The autoboot flag is on.
See Also
boot on page 621
Command
create on page 624
next on page 633
change on page 623
delete on page 625
diag on page 627
test on page 635
ON .
OFF .