Display Igmp Querier - 3Com Wireless LAN Switch WX1200 Command Reference Manual

Wireless lan mobility system; wireless lan switch and controller
Hide thumbs Also See for Wireless LAN Switch WX1200:
Table of Contents

Advertisement

display igmp
querier
Table 76 Output for display igmp mrouter
Field
Multicast routers for vlan VLAN containing the multicast routers. Ports are
Port
Mrouter-IPaddr
Mrouter-MAC
Type
TTL
See Also
display igmp mrouter on page 426
set igmp mrouter on page 435
Shows information about the active multicast querier, on one VLAN or all
VLANs. Queriers are listed separately for each VLAN. Each VLAN can have
only one querier.
Syntax —
display igmp querier [vlan vlan-id]
— VLAN name or number. If you do not specify a
vlan vlan-id
VLAN, MSS displays querier information for all VLANs.
Defaults — None.
Access — Enabled.
Description
listed separately for each VLAN.
Number of the physical port through which the WX
can reach the router.
IP address of the multicast router.
MAC address of the multicast router.
How the WX learned that the port is a multicast
router port:
conf — Static multicast port configured by an
administrator
madv — Multicast advertisement
quer — IGMP query
dvmrp — Distance Vector Multicast Routing
Protocol (DVMRP)
pimv1 — Protocol Independent Multicast (PIM)
version 1
pimv2 — PIM version 2
Number of seconds before this entry ages out if
unused. For static multicast router entries, the TTL
value is undef. Static multicast router entries do not
age out.

display igmp querier

427

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx4400Wxr1003crwx440095a3crwx120695a3crwxr10095a

Table of Contents