Set Security Acl Hit-Sample-Rate - 3Com Wireless LAN Switch WX1200 Command Reference Manual

466 C 14: S
HAPTER ECURITY
set security acl
hit-sample-rate
ACL C
OMMANDS
See Also
clear security acl map on page 447
commit security acl on page 449
set mac-user attr on page 249
set mac-usergroup attr on page 254
set security acl on page 459
set user attr on page 259
set usergroup on page 261
display security acl map on page 453
Specifies the time interval, in seconds, at which the packet counter for
each security ACL is sampled for display. The counter counts the number
of packets filtered by the security ACL — or "hits."
Syntax — set security acl hit-sample-rate seconds
seconds — Number of seconds between samples. A sample rate of 0
(zero) disables the sample process.
Defaults — By default, the hits are not sampled.
Access — Enabled.
History — Introduced in MSS Version 3.0. Syntax changed from
hit-sample-rate seconds to set security acl hit-sample-rate seconds,
to allow the command to be saved in the configuration file.
Usage — To view counter results for a particular ACL, use the display
security acl info acl-name command. To view the hits for all security
ACLs, use the display security acl hits command.