Network Domain Commands; Network Domain Commands By Usage - 3Com Wireless LAN Switch WX1200 Command Reference Manual

Wireless lan mobility system; wireless lan switch and controller

Hide thumbs Also See for Wireless LAN Switch WX1200:

Table of Contents

Network Domain

Use Network Domain commands to configure and manage Network

Domain groups.

A Network Domain is a group of geographically dispersed Mobility Domains

that share information among themselves over a WAN link. This shared

information allows a user configured on a WX switch in one Mobility Domain

to establish connectivity on a WX switch in another Mobility Domain elsewhere

in the same Network Domain. The WX switch forwards the user traffic by

creating a VLAN tunnel to a WX switch in the remote Mobility Domain.

In a Network Domain, one or more WX switches serve as a seed switch.

At least one of the Network Domain seeds maintains a connection with

each of the member WX switches in the Network Domain. The Network

Domain seeds share information about the VLANs configured on their

members, so that all the Network Domain seeds have a common

database of VLAN information.

This chapter presents Network Domain commands alphabetically. Use

Table 47 to locate commands in this chapter based on their use.

Table 47 Network Domain Commands by Usage

Network Domain

set network-domain mode seed domain-name on

set network-domain mode member seed-ip on

set network-domain peer on page 281

clear network-domain on page 274

clear network-domain mode on page 275