Commands By Usage - 3Com Wireless LAN Switch WX1200 Command Reference Manual

17
Commands by
Usage
802.1X M
C
OMMANDS
Use 802. IEEE X management commands to modify the default settings
for IEEE 802.1X sessions on an WX switch. For best results, change the
settings only if you are aware of a problem with the WX switch's 802.1X
performance.
CAUTION: 802.1X parameter settings are global for all SSIDs configured
on the switch.
This chapter presents 802.1X commands alphabetically. Use Table 86 to
locate commands in this chapter based on their use. For information
about configuring 802.1X commands for user authentication, see "AAA
Commands" on page 201.
Table 86 802.1X Commands by Usage
Type
Wired Authentication Port
Control
Keys
Bonded Authentication
Reauthentication
ANAGEMENT
Command
set dot1x port-control on page 512
clear dot1x port-control on page 501
set dot1x authcontrol on page 508
set dot1x key-tx on page 510
set dot1x tx-period on page 516
clear dot1x tx-period on page 505
set dot1x wep-rekey on page 517
set dot1x wep-rekey-period on page 518
clear dot1x bonded-period on page 500
set dot1x bonded-period on page 509
set dot1x reauth on page 513
set dot1x reauth-max on page 514