Clear Log Trace; Clear Trace - 3Com Wireless LAN Switch WX1200 Command Reference Manual

590 C 21: T
HAPTER RACE

clear log trace

clear trace

C
OMMANDS
Deletes the log messages stored in the trace buffer.
Syntax —
clear log trace
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To delete the trace log, type the following command:
WX4400# clear log trace
See Also
display log buffer on page 610
set log on page 614
Deletes running trace commands and ends trace processes.
Syntax —
clear trace {trace-area | all}
— Ends a particular trace process. Specify one of the
trace-area
following keywords to end the traces documented in this chapter:
authorization
— Ends an 802.1X trace
dot1x
authentication
— Ends a session manager trace
sm
— Ends all trace processes.
all
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To clear all trace processes, type the following command:
WX4400# clear trace all
success: clear trace all
— Ends an authorization trace
— Ends an authentication trace