Display Ntp - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display ntp

Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status
----------------------------------
Enabled
Table 38 describes the fields in this display.
Table 38 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.
See Also
clear ip telnet on page 131
display ip https on page 145
set ip https server on page 167
set ip telnet on page 171
set ip telnet server on page 172
Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Port
23
display ntp 149