Display Roaming Station - 3Com Wireless LAN Switch WX1200 Command Reference Manual

106 C 5: VLAN C
HAPTER
display roaming
station
WX4400# display roaming station
User Name
----------------------- --------------- ----------------- -------------- ------
redsqa
OMMANDS
Shows a list of the stations roaming to the wireless LAN switch through a
VLAN tunnel.
Syntax —

display roaming station

[vlan vlan-id] [peer
vlan vlan-id
peer ip-addr
this peer WX switch in the Mobility Domain.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Old AP MAC field removed in
MSS Version 4.1.
Usage — The output displays roaming stations within the previous 1
second.
Examples — To display all stations roaming to the WX switch, type the
following command:
Station Address
10.10.10.5
Table 22 describes the fields in the display.
Table 22 Output for display roaming station
Field Description
User Name Name of the user. This is the name used for authentication. The
name resides in a RADIUS server database or the local user
database on a wireless LAN switch.
Station IP address of the user device.
Address
VLAN Name of the VLAN to which the RADIUS server or WX switch
local user database assigned the user.
ip-addr
]
— Output is restricted to stations using this VLAN.
— Output is restricted to stations tunnelling through
VLAN
violet
State
Up