Set Authentication Mac - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set authentication
mac
Configures authentication and defines where it is performed for specified
non-802.1X users with network access through a media access control
(MAC) address.
Syntax —

set authentication mac

{ssid ssid-name | wired} mac-addr-glob method1
[method2] [method3] [method4]
ssid ssid-name
applies. To apply the rule to all SSIDs, type any.
— Applies this authentication rule specifically to users
wired
connected to a wired authentication port.
mac-addr-glob — A single user or set of users with access via a MAC
address. Specify a MAC address, or use the wildcard (*) character to
specify a set of MAC addresses. (For details, see "MAC Address
Globs" on page 27.)
method1, method2, method3, method4
methods that MSS uses to handle authentication. Specify one or more
of the following methods in priority order. MSS applies multiple
methods in the order you enter them.
A method can be one of the following:
local — Uses the local database of usernames and user groups on
the WX switch for authentication.
server-group-name
for authentication. You can enter up to four names of existing
RADIUS server groups as methods.
For more information, see "Usage."
Defaults — By default, authentication is deactivated for all MAC users,
which means MAC address authentication fails by default. When using
RADIUS for authentication, a MAC user's MAC address is also used as the
authorization password for that user, and no global authorization
password is set.
Access — Enabled.
History —Introduced in MSS Version 3.0.
— SSID name to which this authentication rule
— Uses the defined group of RADIUS servers
set authentication mac
— At least one of up to four
239