Rollback Security Acl - 3Com Wireless LAN Switch WX1200 Command Reference Manual

458 C 14: S
HAPTER ECURITY

rollback security acl

ACL C
OMMANDS
Table 81 Output of display security acl resource-usage (continued)
Field
In mapping
No VLAN or PORT
mapping
No VPORT mapping
Clears changes made to the security ACL edit buffer since it was last
saved. The ACL is rolled back to its state after the last commit security
acl command was entered. All uncommitted ACLs in the edit buffer are
cleared.
Syntax — rollback security acl {acl-name | all}
acl-name — Name of an existing security ACL to roll back. ACL names
must start with a letter and are case-insensitive.
all — Rolls back all security ACLs in the edit buffer, clearing all
uncommitted ACEs.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Description
Application of security ACLs to incoming traffic on the WX
switch:
True — Security ACLs are mapped to incoming traffic.
False — No security ACLs are mapped to incoming
traffic.
Application of security ACLs to WX VLANs or ports on the
WX switch:
True — No security ACLs are mapped to VLANs or ports.
False — Security ACLs are mapped to VLANs or ports.
Application of security ACLs to WX virtual ports on the WX
switch:
True — No security ACLs are mapped to virtual ports.
False — Security ACLs are mapped to virtual ports.