Display Security Acl Hits - 3Com Wireless LAN Switch WX1200 Command Reference Manual

display security acl
hits
Examples — To display a summary of the committed security ACLs on a
WX switch, type the following command:
WX4400# display security acl
ACL table
ACL
---------------------------- ---- ------ -------
acl_123
acl_133
acl_124
To view a summary of the security ACLs in the edit buffer, type the
following command:
WX4400# display security acl editbuffer
ACL edit-buffer table
ACL
---------------------------- ---- --------------
acl_122
acl_132
acl-144
See Also
clear security acl on page 446
display security acl info on page 452
set security acl on page 459
Displays the number of packets filtered by security ACLs ("hits") on the
WX switch. Each time a packet is filtered by a security ACL, the hit
counter increments.
Syntax —

display security acl hits

Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — For MSS to count hits for a security ACL, you must specify hits
in the set security acl commands that define ACE rules for the ACL.
display security acl hits
Type Class Mapping
IP Static Port 2 In
IP Static Port 4 In
IP Static
Type Status
IP Not committed
IP Not committed
IP Not committed
451