Reset {Ap | Dap - 3Com Wireless LAN Switch WX1200 Command Reference Manual

324 C 11: M
HAPTER

reset {ap | dap}

A P C
ANAGED CCESS OINT OMMANDS
set service-profile ssid-name on page 384
set service-profile ssid-type on page 385
set service-profile tkip-mc-time on page 386
set service-profile web-portal-form on page 387
set service-profile wep active-multicast- index on page 388
set service-profile wep active-unicast- index on page 389
set service-profile wep key-index on page 390
set service-profile wpa-ie on page 391
Restarts a MAP access point.
Syntax —
reset {ap port-list | dap dap-num}
ap port-list
restart.
dap dap-num
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — When you enter this command, the MAP access point drops all
sessions and reboots.
CAUTION: Restarting a MAP access point can cause data loss for users
who are currently associated with the MAP.
Examples — The following command resets the MAP access point on
port 6:
WX1200# reset ap 6
This will reset specified AP devices.
Would you like to continue? (y/n)y
success: rebooting ap attached to port 6
— List of ports connected to the MAP access points to
— Number of a Distributed MAP to reset.