Snoop Commands; Clear Snoop; Clear Snoop Map - 3Com Wireless LAN Switch WX1200 Command Reference Manual

598 C 22: S
HAPTER NOOP

clear snoop

clear snoop map

C
OMMANDS
Deletes a snoop filter.
Syntax —
clear snoop filter-name
filter-name
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command deletes snoop filter snoop1:
WX1200# clear snoop snoop1
See Also
set snoop on page 599
display snoop info on page 604
Removes a snoop filter from a MAP radio.
Syntax —
clear snoop map filter-name dap dap-num radio {1 | 2}
filter-name
dap dap-num
is mapped
— Radio 1 of the MAP.
radio 1
— Radio 2 of the MAP. (This option does not apply to
radio 2
single-radio models.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command removes snoop filter snoop2 from
radio 2 on Distributed MAP 3:
— Name of the snoop filter.
— Name of the snoop filter.
— Number of a Distributed MAP to which to snoop filter