322
C
11: M
HAPTER
ANAGED
A
P
C
CCESS
OINT
OMMANDS
Table 64 Output for display service-profile (continued)
Field
beacon
auth-fallthru
WEP Key 1 value
WEP Key 2 value
WEP Key 3 value
WEP Key 4 value
WEP Unicast Index
WEP Multicast Index
Shared Key Auth
Description
Indicates whether the radio sends beacons, to advertise the
SSID:
no
yes
Secondary (fallthru) encryption type when a user tries to
authenticate but the WX switch managing the radio does
not have an authentication rule with a userglob that matches
the username.
last-resort — Automatically authenticates the user and
allows access to the SSID requested by the user, without
requiring a username and password.
none—Denies authentication and prohibits the user from
accessing the SSID.
web-auth — Redirects the user to a web page for login
to the SSID.
State of static WEP key number 1. Radios can use this key to
encrypt traffic with static Wired-Equivalent Privacy (WEP):
none —T he key is not configured.
preset — The key is configured.
Note: The WEP parameters apply to traffic only on the
encrypted SSID.
State of static WEP key number 2:
none — The key is not configured.
preset — The key is configured.
State of static WEP key number 3:
none — The key is not configured.
preset — The key is configured.
State of static WEP key number 4:
none — The key is not configured.
preset — The key is configured.
Index of the static WEP key used to encrypt unicast traffic on
an encrypted SSID.
Index of the static WEP key used to encrypt multicast traffic
on an encrypted SSID.
Indicates whether shared-key authentication is enabled.