Set Dot1X Quiet-Period; Set Dot1X Reauth - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set dot1x
quiet-period

set dot1x reauth

Sets the number of seconds a WX remains quiet and does not respond to
a supplicant after a failed authentication.
Syntax —
set dot1x quiet-period seconds
— Specify a value between 0 and 65,535.
seconds
Defaults — The default is 60 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the quiet period to
90 seconds:
WX4400# set dot1x quiet-period 90
success: dot1x quiet period set to 90.
See Also
clear dot1x quiet-period on page 502
set dot1x wep-rekey-period on page 518
Determines whether the WX switch allows the reauthentication of
supplicants (clients).
Syntax —
set dot1x reauth {enable | disable}
— Permits reauthentication.
enable
— Denies reauthentication.
disable
Defaults — Reauthentication is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to enable reauthentication of
supplicants (clients):
WX4400# set dot1x reauth enable
success: dot1x reauthentication enabled.

set dot1x quiet-period

513