630
C
24: B
HAPTER
OOT
fver
P
C
ROMPT
OMMANDS
Table 112 Output of display command (continued)
Field
DEVICE
FILENAME
FLAGS
OPTIONS
See Also
change on page 623
create on page 624
delete on page 625
next on page 633
Displays the version of a system image file installed in a specific location
on a WX switch.
Syntax —
fver {c: | d: | e: | f: | boot0: | boot1:}
[filename]
c:
— Nonvolatile storage area containing boot partition 0 (primary).
d:
— Nonvolatile storage area containing boot partition 1
(secondary).
e:
— Primary partition of the flash card in the flash card slot.
— Secondary partition of the flash card in the flash card slot.
f:
boot0:
— Boot partition 0.
boot1:
— Boot partition 1.
— System image filename.
filename
Description
Location of the system image file:
c: — Nonvolatile storage area containing boot partition 0
d: — Nonvolatile storage area containing boot partition 1
e: — Primary partition of the flash card in the flash card slot
f: — Secondary partition of the flash card in the flash
card slot
boot0 — boot partition 0
boot1 — boot partition 1
System image file name.
Number representing the bit settings of boot flags to pass to
the booted system image.
String up to 128 bytes of boot options to pass to the booted
system image.