Rep 12.6 Eject Roll Assembly - Xerox DocuColor 2240 Service Manual

REP 12.6 Eject Roll Assembly

Parts List on PL 17.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove the following parts:
a. Rear Cover (PL 17.5)
b. Stacker Tray (PL 17.1)
c. Right Cover (PL 17.1)
d. Front Cover (PL 17.5)
2. Remove the Bracket (Figure 1).
2
Remove
Bracket
Figure 1 Remove the Bracket
Repairs and Adjustments
REP 12.6
WARNING
1
Remove
Screws (4)
3. Disconnect the connector (Figure
3
Disconnect
Connector
Figure 2 Disconnecting the Connector
02/03
4-106
2).
1
Remove
Screws (2)
DC 3535/2240/1632
2
Remove
Plate
Initial issue