Environmental Requirements And Specifications For Ssr1200; Clearance Requirements For Hardware Maintenance Of Ssr1200 - Juniper SSR1200 Hardware Manual

Hide thumbs Also See for SSR1200:

Table of Contents

Environmental Requirements and Specifications for SSR1200

The SSR1200 must be housed in dry, clean, well-ventilated, and temperature-controlled environment.

Follow these environmental guidelines:

• The site must be dust-free because dust can clog air intake vent, reducing the efficiency of the

cooling system.

• Maintain ambient airflow for normal operation. If the airflow is blocked or restricted, or if the intake

air is too warm, the appliance might overheat.

The following table lists the environmental specifications for the SSR1200.

Table 9: Environmental Specifications for SSR1200

Description

Operating temperature

Storage temperature

When planning the site for installing an SSR1200, you must allow sufficient clearance around the

installed chassis.

• For the operating temperature of the SSR1200 to be optimal, the airflow around the chassis must be

unrestricted. See

"Cooling System" on page 8

chassis.

• For service personnel to remove and install hardware components, and to accommodate the

interface and power cable bend radius, there must be adequate space at the front and rear of the

appliance. Allow at least 24 in. (61 cm) of space both at the front and the rear of the appliance.

• If you are mounting the appliance in a rack with other equipment, or if you are placing it on the

desktop near other equipment, ensure that the exhaust from other equipment does not blow into the

intake vents of the chassis.

Value

0° C to 40° C (32° F to 104° F)

-20° C to 70° C (-4° F to 158° F)

for more information about the airflow through the

Table of Contents