To install the power supply module
Danger:
Risk ofelectric shock
High current inside the chassis can cause severe injury.
The server is shipped with one power supply module installed in the bottom power supply bay.
You must install the second power supply module, as described here:
1. Align the power supply module with the top power supply bay.
2. Slide the power supply module into the bay until the module is secured by its
3. Secure the power supply module to the chassis with two thumbscrews at the corners
®
Avaya CallPilot
1002rp Server Hardware Installation
connector.
Use some force, if necessary.
of the power supply faceplate.
To install the power supply module
December 2010
35