How To Use The Point Table - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

4. HOW TO USE THE POINT TABLE

4. HOW TO USE THE POINT TABLE
The following items are the same as MR-J4-_A_-RJ servo amplifiers. For details, refer to each section
indicated in the detailed explanation field. "MR-J4-_A_" means "MR-J4-_A_(-RJ) Servo Amplifier Instruction
Manual".
Switching power on for the first time
Item
POINT
When you use a linear servo motor, replace the following left words to the right
words.
Load to motor inertia ratio
Torque
(Servo motor) speed
For the mark detection function (Current position latch), refer to section 12.2.1.
For the mark detection function (Interrupt positioning), refer to section 12.2.2.
For the infinite feed function (setting degree), refer to section 12.3.
There are the following restrictions on the number of gear teeth on machine side
([Pr. PA06 Number of gear teeth on machine side]) and the servo motor speed
(N).
When CMX ≤ 2000, N < 3076.7 r/min
When CMX > 2000, N < (3276.7 - CMX)/10 r/min
When the servo motor is operated at a servo motor speed higher than the limit
value, [AL. E3 Absolute position counter warning] will occur.
4 - 1
www.kavrammuhendislik.com.tr
Detailed explanation
MR-J4-_A_-RJ 100 W
or more
MR-J4-_A_ section 4.1
→ Load to motor mass ratio
→ Thrust
→ (Linear servo motor) speed
MR-J4-03A6-RJ
MR-J4-_A_ section 18.4