Point Table - Mitsubishi Electric MR-J2S-CP Instruction Manual

6. MR Configurator (SERVO CONFIGURATION SOFTWARE)

6.5 Point table

Click "Position-Data" on the menu bar and click "Point Tables" on the menu.
When the above choices are made, the following window appears.
e)
(1) Point table data write ( a) )
Click the point table data changed and press the "Write" button to write the new point table data to the
servo amplifier.
(2) Point table data verify ( b) )
Click the "Verify" button to verify all data being displayed and the data of the servo amplifier.
g) f)
a)
b)
c)
d)
h)
6 - 6