Program Setting Method; Setting Procedure - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

5. HOW TO USE THE PROGRAM

5.8 Program setting method

The following shows the setting method of programs using MR Configurator2.

5.8.1 Setting procedure

Click "Positioning-data" in the menu bar and click "Program" in the menu.
The following window will be displayed by clicking.
(1) Reading program (a)
Click "Read" to read and display programs stored in the servo amplifier.
(2) Writing program (b)
Click "Write" to write the changed programs to the servo amplifier.
(3) Verifying program (c)
Click "Verify" to verify the contents of programs in the personal computer with contents of programs of
the servo amplifier.
(4) Single-step feed (d)
Click "Single-step Feed" to perform the single-step feed test operation. Refer to section 3.1.9 or 3.2.9 for
details.
(5) Number of steps (e)
Used number of steps in all programs and remained steps are displayed.
(6) Editing program (f)
You can edit any program. Click "Edit" to open the window for program edit. For the rotation direction,
refer to section 5.8.2.
(a)
(g)
(h)
(e)
5 - 65
www.kavrammuhendislik.com.tr
(c) (d) (i)
(b)
(j)
(f)