Mitsubishi Electric MELSERVO-J4 Series Instruction Manual page 95

3. DISPLAY AND OPERATION SECTIONS
(b) Parameters of 6 or more digits
The following example gives the operation procedure to change the electronic gear numerator to
"123456" with [Pr. PA06 Electronic gear numerator].
Press the "MODE" button to switch to the basic setting parameter screen.
Press the "UP" or "DOWN" button to select [Pr. PA06].
Setting of upper 1 digit
......
......
www.kavrammuhendislik.com.tr
Press the "SET" button once.
Press the "MODE" button
once.
Press the "SET" button
once.
The screen flickers. ......
Change the setting with
the "UP" or "DOWN"
button.
Press the "SET" button
once.
Enter the setting. ...
Press the "MODE" button
once.
3 - 22
Setting of lower 4 digits