Point Table Setting - Mitsubishi Electric MELSERVO-J4 Series Instruction Manual

3. DISPLAY AND OPERATION SECTIONS

3.1.5 Point table setting

You can set the target position, servo motor speed, acceleration time constant, deceleration time constant,
dwell, auxiliary function and M code.
(1) Display transition
Point table transition
Point table No. 1
Point table No. 2
Point table No. 3
SET button
UP
DOWN
Point table No. 253
MODE button
Point table No. 254
Point table No. 255
3 - 17
www.kavrammuhendislik.com.tr
Setting item transition
Target position
Servo motor speed
Acceleration time
constant
Deceleration time
constant
Dwell
Auxiliary function
M code
UP
DOWN