Connections - Avaya Meridian 1 Series Upgrade Manual

Connections

Connection checklist
Table 7
Connections checklist
Do you have:
A serial cable (DTE-DTE null modem cable) to connect the server to a maintenance
terminal? The IBM x3350 requires a NTRX26NPE6 9 pin female to 9 pin female null
modem cable.
An NTAK19EC cable for each CP PM or CP DC card? If you are using a Media Gateway
or Universal Equipment Module to host the cards, this cable adapts the 50-pin MDF
connector on the back of the shelf to a 25-pin DB connector.
Shielded CAT5 cables (or better) to connect the server to the ELAN and TLAN subnets?
This section contains information about server connections.
WARNING
Do not modify or use a supplied AC power cord if it is not
the correct type required for the host region.
Server cards are powered through the backplane of the Media Gateway,
Universal Equipment Module, or Media Gateway cabinet into which they
are installed and do not require a power cord.
Before connecting a Server, ensure that you have the following materials
on-hand.
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
lnstalling a Signaling Server
IMPORTANT!
Page 126 of 159