Figure 14
One Ethernet port coupler in adapter plate
The following is a list of items in the NTDW69AAE5 cabling kit:
•
two RJ-45 CAT5 Ethernet patch cables
•
two Ethernet port couplers
•
one Ethernet port adapter plate
•
two screws
•
two nuts
•
two washers
•
two ferrite beads
2
Insert an Ethernet port coupler into the adapter plate. See Figure 14.
3
Insert the other Ethernet port coupler into the adapter plate. See Figure
15 on page 115.
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
lnstalling a Signaling Server
Page 114 of 159