Avaya Meridian 1 Series Upgrade Manual page 38

2 If Core 1 is active, make Core 0 active:
SCPU
****
Procedure 5
Checking that Clock Controller 0 is active
1 Check the status of the Clock Controllers:
LD 60
SSCK 0
SSCK 1
2 If Clock Controller 1 is active, switch to Clock Controller 0.
SWCK
****
3 Disable Clock Controller 1.
DIS CC 1
****
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
Performing the upgrade
Switch to Core 0 (if necessary)
Exit program
End of Procedure
Load program
Obtain the status of Clock Controller 0
Obtain the status of Clock Controller 1
Switch to Clock Controller 0 (if necessary)
Exit program
Software disable Clock Controller 1
Exit program
End of Procedure
Page 38 of 159