Table of Contents
Advertisement
•
2 GB Compact Flash (CF) with Linux software, 2 GB blank CF
•
1 GB DDR SO-DIMM memory upgrade (optional, provided if required)
Overview
An upgrade of the Signaling Server software consists of the following steps:
•
Back up application databases using Element Manager
•
Install CS 1000 Linux Base and configure parameters
•
Use Centralized Deployment manager to deploy and install Signaling
Server applications
•
Configure the system or import backup node files in Element
Manager
•
Use Element Manager to restore backups of application databases
Avaya recommends that you back up the application databases before
performing the upgrade. The application databases consist of the IP Phone
database and the NRS database.
If you do not know whether the Signaling Server being upgraded has an NRS,
use Procedure 34, "Verifying the presence of an NRS," on
this determination.
If you have an NRS database on the Signaling Server and want to back it up
before performing the upgrade, you must use the backup tool in NRS
Manager. After the Signaling Server is upgraded, use NRS Manager to restore
the NRS database (from your local PC) and activate it for use by the NRS.
For instructions on backing up and restoring an NRS database, see Avaya
Network Routing Service Fundamentals (NN43001-130).
For instructions on backing up and restoring the IP Phone database, see
Signaling Server IP Line Applications Fundamentals (NN3001-125).
lnstalling a Signaling Server
CS 1000M SG CP PIV to CS 1000M MG CP PIV FNF Upgrade
Page 136 of 159
page 137
to make
Advertisement
Table of Contents
